Real stone has a weight and calm that no imitation matches. The Natural Marble Glass Shade Wall Lamp from Lumen & Loam pairs a natural marble base with a milky white glass shade, so the light spills softly across the veining and the wall behind it. It suits a bedside, a bathroom vanity, a hallway or a living room where you want quiet luxury.
Every backplate is cut from natural marble, which means the veining on your lamp is unique. The white glass shade diffuses a warm white LED light into a gentle, glare-free glow that flatters skin and stone alike. Three configurations are offered: a single light at 35 cm high, a two light at 44 cm, and a three light at 60 cm for a wider wash of light. The fixture is hardwired to the wall; installation by a qualified electrician is recommended, and the marble's weight calls for secure fixings into a solid wall or stud.
Use the single light either side of a bed, the two light over a bathroom mirror, and the three light along a hallway or above a console. Dust the marble and glass with a soft, dry cloth with the power off, and avoid acidic cleaners on the stone. Each option ships as one complete fixture.
- Material: natural marble base, white glass shade
- Sizes: 1 light H35 cm, 2 light H44 cm, 3 light H60 cm
- Light: warm white LED
- Mounting: hardwired wall mount, secure fixings required
- Rooms: bedside, bathroom, hallway, living room, aisle
- Safety: installation by a qualified electrician recommended
- Care: dry soft cloth only, no acidic cleaners
Electrical safety and certification
Certification status: we do not hold UL, ETL or CSA listing documentation for this fixture, so it should be treated as uncertified equipment. Many local electrical codes and some homeowner insurance policies restrict the installation of uncertified mains-voltage fixtures. Please check your local code before you buy.
Installation must be carried out by a licensed electrician. This is a mains-voltage product. Incorrect installation can cause electric shock or fire.
- Switch off power at the breaker and confirm the circuit is dead before starting work.
- Indoor dry-location use only unless an IP rating is stated in the specifications above.
- Do not exceed the maximum bulb wattage listed in the specifications.
- Do not modify the fixture, its wiring, its driver or the supplied mounting hardware.
- Stop using the product immediately if the cord, housing or terminals are damaged.
ā California Proposition 65 warning
WARNING: This product can expose you to chemicals including DEHP and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
