The Slatted Black Up Down Wall Light has a slatted face, so the beam that goes up the wall arrives broken into fine lines instead of a flat wash, while the downward light stays plain and useful. The effect really shows on a textured wall, brick or render, which is exactly where it is worth putting. Lumen & Loam stocks it as the more graphic take on the up and down sconce.
The body is iron in black with an integrated warm white LED, so there is no bulb to replace. It is rated IP65 and runs on 85 to 265V, hardwired with no plug, which means it needs a circuit at the mounting point; installation by a qualified electrician is recommended, especially outdoors. The fitting is not dimmable and carries a two-year warranty.
Choose 7W for a doorway or a narrow wall and 12W where there is more wall to fill, singly or as a set of two. Mount it either side of a garage, along a rendered or brick wall, beside a front door, or on a balcony. A pair spaced evenly reads better than one on its own. Wipe the iron body with a soft dry cloth to keep the finish clean.
- Output: 7W or 12W, warm white
- Pack: single or set of 2
- Body: black iron, slatted face
- LED: integrated, no bulb to replace
- Power: 85-265V, hardwired, not dimmable
- Rating: IP65, 2 year warranty
- Safety: installation by a qualified electrician recommended
Electrical safety and certification
Certification status: we do not hold UL, ETL or CSA listing documentation for this fixture, so it should be treated as uncertified equipment. Many local electrical codes and some homeowner insurance policies restrict the installation of uncertified mains-voltage fixtures. Please check your local code before you buy.
Installation must be carried out by a licensed electrician. This is a mains-voltage product. Incorrect installation can cause electric shock or fire.
- Switch off power at the breaker and confirm the circuit is dead before starting work.
- Indoor dry-location use only unless an IP rating is stated in the specifications above.
- Do not exceed the maximum bulb wattage listed in the specifications.
- Do not modify the fixture, its wiring, its driver or the supplied mounting hardware.
- Stop using the product immediately if the cord, housing or terminals are damaged.
ā California Proposition 65 warning
WARNING: This product can expose you to chemicals including DEHP and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
